/* Copyright (C) 1989, 2000 Aladdin Enterprises. All rights reserved. */ /*$Id: ansi2knr.c,v 1.14 2003/09/06 05:36:56 eggert Exp $*/ /* Convert ANSI C function definitions to K&R ("traditional C") syntax */ /* ansi2knr is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY. No author or distributor accepts responsibility to anyone for the consequences of using it or for whether it serves any particular purpose or works at all, unless he says so in writing. Refer to the GNU General Public License (the "GPL") for full details. Everyone is granted permission to copy, modify and redistribute ansi2knr, but only under the conditions described in the GPL. A copy of this license is supposed to have been given to you along with ansi2knr so you can know your rights and responsibilities. It should be in a file named COPYLEFT, or, if there is no file named COPYLEFT, a file named COPYING. Among other things, the copyright notice and this notice must be preserved on all copies. We explicitly state here what we believe is already implied by the GPL: if the ansi2knr program is distributed as a separate set of sources and a separate executable file which are aggregated on a storage medium together with another program, this in itself does not bring the other program under the GPL, nor does the mere fact that such a program or the procedures for constructing it invoke the ansi2knr executable bring any other part of the program under the GPL. */ /* * Usage: ansi2knr [--filename FILENAME] [INPUT_FILE [OUTPUT_FILE]] * --filename provides the file name for the #line directive in the output, * overriding input_file (if present). * If no input_file is supplied, input is read from stdin. * If no output_file is supplied, output goes to stdout. * There are no error messages. * * ansi2knr recognizes function definitions by seeing a non-keyword * identifier at the left margin, followed by a left parenthesis, with a * right parenthesis as the last character on the line, and with a left * brace as the first token on the following line (ignoring possible * intervening comments and/or preprocessor directives), except that a line * consisting of only * identifier1(identifier2) * will not be considered a function definition unless identifier2 is * the word "void", and a line consisting of * identifier1(identifier2, <<arbitrary>>) * will not be considered a function definition. * ansi2knr will recognize a multi-line header provided that no intervening * line ends with a left or right brace or a semicolon. These algorithms * ignore whitespace, comments, and preprocessor directives, except that * the function name must be the first thing on the line. The following * constructs will confuse it: * - Any other construct that starts at the left margin and * follows the above syntax (such as a macro or function call). * - Some macros that tinker with the syntax of function headers. */ /* * The original and principal author of ansi2knr is L. Peter Deutsch * <ghost@aladdin.com>. Other authors are noted in the change history * that follows (in reverse chronological order): lpd 2000-04-12 backs out Eggert's changes because of bugs: - concatlits didn't declare the type of its bufend argument; - concatlits didn't recognize when it was inside a comment; - scanstring could scan backward past the beginning of the string; when - the check for \ + newline in scanstring was unnecessary. 2000-03-05 Paul Eggert <eggert@twinsun.com> Add support for concatenated string literals. * ansi2knr.c (concatlits): New decl. (main): Invoke concatlits to concatenate string literals. (scanstring): Handle backslash-newline correctly. Work with character constants. Fix bug when scanning backwards through backslash-quote. Check for unterminated strings. (convert1): Parse character constants, too. (appendline, concatlits): New functions. * ansi2knr.1: Document this. lpd 1999-08-17 added code to allow preprocessor directives wherever comments are allowed lpd 1999-04-12 added minor fixes from Pavel Roskin <pavel_roskin@geocities.com> for clean compilation with gcc -W -Wall lpd 1999-03-22 added hack to recognize lines consisting of identifier1(identifier2, xxx) as *not* being procedures lpd 1999-02-03 made indentation of preprocessor commands consistent lpd 1999-01-28 fixed two bugs: a '/' in an argument list caused an endless loop; quoted strings within an argument list confused the parser lpd 1999-01-24 added a check for write errors on the output, suggested by Jim Meyering <meyering@ascend.com> lpd 1998-11-09 added further hack to recognize identifier(void) as being a procedure lpd 1998-10-23 added hack to recognize lines consisting of identifier1(identifier2) as *not* being procedures lpd 1997-12-08 made input_file optional; only closes input and/or output file if not stdin or stdout respectively; prints usage message on stderr rather than stdout; adds --filename switch (changes suggested by <ceder@lysator.liu.se>) lpd 1996-01-21 added code to cope with not HAVE_CONFIG_H and with compilers that don't understand void, as suggested by Tom Lane lpd 1996-01-15 changed to require that the first non-comment token on the line following a function header be a left brace, to reduce sensitivity to macros, as suggested by Tom Lane <tgl@sss.pgh.pa.us> lpd 1995-06-22 removed #ifndefs whose sole purpose was to define undefined preprocessor symbols as 0; changed all #ifdefs for configuration symbols to #ifs lpd 1995-04-05 changed copyright notice to make it clear that including ansi2knr in a program does not bring the entire program under the GPL lpd 1994-12-18 added conditionals for systems where ctype macros don't handle 8-bit characters properly, suggested by Francois Pinard <pinard@iro.umontreal.ca>; removed --varargs switch (this is now the default) lpd 1994-10-10 removed CONFIG_BROKETS conditional lpd 1994-07-16 added some conditionals to help GNU `configure', suggested by Francois Pinard <pinard@iro.umontreal.ca>; properly erase prototype args in function parameters, contributed by Jim Avera <jima@netcom.com>; correct error in writeblanks (it shouldn't erase EOLs) lpd 1989-xx-xx original version */ /* Most of the conditionals here are to make ansi2knr work with */ /* or without the GNU configure machinery. */ #if HAVE_CONFIG_H # include <config.h> #endif #include <stdio.h> #include <ctype.h> #if HAVE_CONFIG_H /* For properly autoconfiguring ansi2knr, use AC_CONFIG_HEADER(config.h). This will define HAVE_CONFIG_H and so, activate the following lines. */ # if STDC_HEADERS || HAVE_STRING_H # include <string.h> # else # include <strings.h> # endif #else /* not HAVE_CONFIG_H */ /* Otherwise do it the hard way */ # ifdef BSD # include <strings.h> # else # ifdef VMS extern int strlen(), strncmp(); # else # include <string.h> # endif # endif #endif /* not HAVE_CONFIG_H */ #if STDC_HEADERS # include <stdlib.h> #else /* malloc and free should be declared in stdlib.h, but if you've got a K&R compiler, they probably aren't. */ # ifdef MSDOS # include <malloc.h> # else # ifdef VMS extern char *malloc(); extern void free(); # else extern char *malloc(); extern int free(); # endif # endif #endif /* Define NULL (for *very* old compilers). */ #ifndef NULL # define NULL (0) #endif /* * The ctype macros don't always handle 8-bit characters correctly. * Compensate for this here. */ #ifdef isascii # undef HAVE_ISASCII /* just in case */ # define HAVE_ISASCII 1 #else #endif #if STDC_HEADERS || !HAVE_ISASCII # define is_ascii(c) 1 #else # define is_ascii(c) isascii(c) #endif #define is_space(c) (is_ascii(c) && isspace(c)) #define is_alpha(c) (is_ascii(c) && isalpha(c)) #define is_alnum(c) (is_ascii(c) && isalnum(c)) /* Scanning macros */ #define isidchar(ch) (is_alnum(ch) || (ch) == '_') #define isidfirstchar(ch) (is_alpha(ch) || (ch) == '_') /* Forward references */ char *ppdirforward(); char *ppdirbackward(); char *skipspace(); char *scanstring(); int writeblanks(); int test1(); int convert1(); /* The main program */ int main(argc, argv) int argc; char *argv[]; { FILE *in = stdin; FILE *out = stdout; char *filename = 0; char *program_name = argv[0]; char *output_name = 0; #define bufsize 5000 /* arbitrary size */ char *buf; char *line; char *more; char *usage = "Usage: ansi2knr [--filename FILENAME] [INPUT_FILE [OUTPUT_FILE]]\n"; /* * In previous versions, ansi2knr recognized a --varargs switch. * If this switch was supplied, ansi2knr would attempt to convert * a ... argument to va_alist and va_dcl; if this switch was not * supplied, ansi2knr would simply drop any such arguments. * Now, ansi2knr always does this conversion, and we only * check for this switch for backward compatibility. */ int convert_varargs = 1; int output_error; while ( argc > 1 && argv[1][0] == '-' ) { if ( !strcmp(argv[1], "--varargs") ) { convert_varargs = 1; argc--; argv++; continue; } if ( !strcmp(argv[1], "--filename") && argc > 2 ) { filename = argv[2]; argc -= 2; argv += 2; continue; } fprintf(stderr, "%s: Unrecognized switch: %s\n", program_name, argv[1]); fprintf(stderr, usage); exit(1); } switch ( argc ) { default: fprintf(stderr, usage); exit(0); case 3: output_name = argv[2]; out = fopen(output_name, "w"); if ( out == NULL ) { fprintf(stderr, "%s: Cannot open output file %s\n", program_name, output_name); exit(1); } /* falls through */ case 2: in = fopen(argv[1], "r"); if ( in == NULL ) { fprintf(stderr, "%s: Cannot open input file %s\n", program_name, argv[1]); exit(1); } if ( filename == 0 ) filename = argv[1]; /* falls through */ case 1: break; } if ( filename ) fprintf(out, "#line 1 \"%s\"\n", filename); buf = malloc(bufsize); if ( buf == NULL ) { fprintf(stderr, "Unable to allocate read buffer!\n"); exit(1); } line = buf; while ( fgets(line, (unsigned)(buf + bufsize - line), in) != NULL ) { test: line += strlen(line); switch ( test1(buf) ) { case 2: /* a function header */ convert1(buf, out, 1, convert_varargs); break; case 1: /* a function */ /* Check for a { at the start of the next line. */ more = ++line; f: if ( line >= buf + (bufsize - 1) ) /* overflow check */ goto wl; if ( fgets(line, (unsigned)(buf + bufsize - line), in) == NULL ) goto wl; switch ( *skipspace(ppdirforward(more), 1) ) { case '{': /* Definitely a function header. */ convert1(buf, out, 0, convert_varargs); fputs(more, out); break; case 0: /* The next line was blank or a comment: */ /* keep scanning for a non-comment. */ line += strlen(line); goto f; default: /* buf isn't a function header, but */ /* more might be. */ fputs(buf, out); strcpy(buf, more); line = buf; goto test; } break; case -1: /* maybe the start of a function */ if ( line != buf + (bufsize - 1) ) /* overflow check */ continue; /* falls through */ default: /* not a function */ wl: fputs(buf, out); break; } line = buf; } if ( line != buf ) fputs(buf, out); free(buf); if ( output_name ) { output_error = ferror(out); output_error |= fclose(out); } else { /* out == stdout */ fflush(out); output_error = ferror(out); } if ( output_error ) { fprintf(stderr, "%s: error writing to %s\n", program_name, (output_name ? output_name : "stdout")); exit(1); } if ( in != stdin ) fclose(in); return 0; } /* * Skip forward or backward over one or more preprocessor directives. */ char * ppdirforward(p) char *p; { for (; *p == '#'; ++p) { for (; *p != '\r' && *p != '\n'; ++p) if (*p == 0) return p; if (*p == '\r' && p[1] == '\n') ++p; } return p; } char * ppdirbackward(p, limit) char *p; char *limit; { char *np = p; for (;; p = --np) { if (*np == '\n' && np[-1] == '\r') --np; for (; np > limit && np[-1] != '\r' && np[-1] != '\n'; --np) if (np[-1] == 0) return np; if (*np != '#') return p; } } /* * Skip over whitespace, comments, and preprocessor directives, * in either direction. */ char * skipspace(p, dir) char *p; int dir; /* 1 for forward, -1 for backward */ { for ( ; ; ) { while ( is_space(*p) ) p += dir; if ( !(*p == '/' && p[dir] == '*') ) break; p += dir; p += dir; while ( !(*p == '*' && p[dir] == '/') ) { if ( *p == 0 ) return p; /* multi-line comment?? */ p += dir; } p += dir; p += dir; } return p; } /* Scan over a quoted string, in either direction. */ char * scanstring(p, dir) char *p; int dir; { for (p += dir; ; p += dir) if (*p == '"' && p[-dir] != '\\') return p + dir; } /* * Write blanks over part of a string. * Don't overwrite end-of-line characters. */ int writeblanks(start, end) char *start; char *end; { char *p; for ( p = start; p < end; p++ ) if ( *p != '\r' && *p != '\n' ) *p = ' '; return 0; } /* * Test whether the string in buf is a function definition. * The string may contain and/or end with a newline. * Return as follows: * 0 - definitely not a function definition; * 1 - definitely a function definition; * 2 - definitely a function prototype (NOT USED); * -1 - may be the beginning of a function definition, * append another line and look again. * The reason we don't attempt to convert function prototypes is that * Ghostscript's declaration-generating macros look too much like * prototypes, and confuse the algorithms. */ int test1(buf) char *buf; { char *p = buf; char *bend; char *endfn; int contin; if ( !isidfirstchar(*p) ) return 0; /* no name at left margin */ bend = skipspace(ppdirbackward(buf + strlen(buf) - 1, buf), -1); switch ( *bend ) { case ';': contin = 0 /*2*/; break; case ')': contin = 1; break; case '{': return 0; /* not a function */ case '}': return 0; /* not a function */ default: contin = -1; } while ( isidchar(*p) ) p++; endfn = p; p = skipspace(p, 1); if ( *p++ != '(' ) return 0; /* not a function */ p = skipspace(p, 1); if ( *p == ')' ) return 0; /* no parameters */ /* Check that the apparent function name isn't a keyword. */ /* We only need to check for keywords that could be followed */ /* by a left parenthesis (which, unfortunately, is most of them). */ { static char *words[] = { "asm", "auto", "case", "char", "const", "double", "extern", "float", "for", "if", "int", "long", "register", "return", "short", "signed", "sizeof", "static", "switch", "typedef", "unsigned", "void", "volatile", "while", 0 }; char **key = words; char *kp; unsigned len = endfn - buf; while ( (kp = *key) != 0 ) { if ( strlen(kp) == len && !strncmp(kp, buf, len) ) return 0; /* name is a keyword */ key++; } } { char *id = p; int len; /* * Check for identifier1(identifier2) and not * identifier1(void), or identifier1(identifier2, xxxx). */ while ( isidchar(*p) ) p++; len = p - id; p = skipspace(p, 1); if (*p == ',' || (*p == ')' && (len != 4 || strncmp(id, "void", 4))) ) return 0; /* not a function */ } /* * If the last significant character was a ), we need to count * parentheses, because it might be part of a formal parameter * that is a procedure. */ if (contin > 0) { int level = 0; for (p = skipspace(buf, 1); *p; p = skipspace(p + 1, 1)) level += (*p == '(' ? 1 : *p == ')' ? -1 : 0); if (level > 0) contin = -1; } return contin; } /* Convert a recognized function definition or header to K&R syntax. */ int convert1(buf, out, header, convert_varargs) char *buf; FILE *out; int header; /* Boolean */ int convert_varargs; /* Boolean */ { char *endfn; char *p; /* * The breaks table contains pointers to the beginning and end * of each argument. */ char **breaks; unsigned num_breaks = 2; /* for testing */ char **btop; char **bp; char **ap; char *vararg = 0; /* Pre-ANSI implementations don't agree on whether strchr */ /* is called strchr or index, so we open-code it here. */ for ( endfn = buf; *(endfn++) != '('; ) ; top: p = endfn; breaks = (char **)malloc(sizeof(char *) * num_breaks * 2); if ( breaks == NULL ) { /* Couldn't allocate break table, give up */ fprintf(stderr, "Unable to allocate break table!\n"); fputs(buf, out); return -1; } btop = breaks + num_breaks * 2 - 2; bp = breaks; /* Parse the argument list */ do { int level = 0; char *lp = NULL; char *rp = NULL; char *end = NULL; if ( bp >= btop ) { /* Filled up break table. */ /* Allocate a bigger one and start over. */ free((char *)breaks); num_breaks <<= 1; goto top; } *bp++ = p; /* Find the end of the argument */ for ( ; end == NULL; p++ ) { switch(*p) { case ',': if ( !level ) end = p; break; case '(': if ( !level ) lp = p; level++; break; case ')': if ( --level < 0 ) end = p; else rp = p; break; case '/': if (p[1] == '*') p = skipspace(p, 1) - 1; break; case '"': p = scanstring(p, 1) - 1; break; default: ; } } /* Erase any embedded prototype parameters. */ if ( lp && rp ) writeblanks(lp + 1, rp); p--; /* back up over terminator */ /* Find the name being declared. */ /* This is complicated because of procedure and */ /* array modifiers. */ for ( ; ; ) { p = skipspace(p - 1, -1); switch ( *p ) { case ']': /* skip array dimension(s) */ case ')': /* skip procedure args OR name */ { int level = 1; while ( level ) switch ( *--p ) { case ']': case ')': level++; break; case '[': case '(': level--; break; case '/': if (p > buf && p[-1] == '*') p = skipspace(p, -1) + 1; break; case '"': p = scanstring(p, -1) + 1; break; default: ; } } if ( *p == '(' && *skipspace(p + 1, 1) == '*' ) { /* We found the name being declared */ while ( !isidfirstchar(*p) ) p = skipspace(p, 1) + 1; goto found; } break; default: goto found; } } found: if ( *p == '.' && p[-1] == '.' && p[-2] == '.' ) { if ( convert_varargs ) { *bp++ = "va_alist"; vararg = p-2; } else { p++; if ( bp == breaks + 1 ) /* sole argument */ writeblanks(breaks[0], p); else writeblanks(bp[-1] - 1, p); bp--; } } else { while ( isidchar(*p) ) p--; *bp++ = p+1; } p = end; } while ( *p++ == ',' ); *bp = p; /* Make a special check for 'void' arglist */ if ( bp == breaks+2 ) { p = skipspace(breaks[0], 1); if ( !strncmp(p, "void", 4) ) { p = skipspace(p+4, 1); if ( p == breaks[2] - 1 ) { bp = breaks; /* yup, pretend arglist is empty */ writeblanks(breaks[0], p + 1); } } } /* Put out the function name and left parenthesis. */ p = buf; while ( p != endfn ) putc(*p, out), p++; /* Put out the declaration. */ if ( header ) { fputs(");", out); for ( p = breaks[0]; *p; p++ ) if ( *p == '\r' || *p == '\n' ) putc(*p, out); } else { for ( ap = breaks+1; ap < bp; ap += 2 ) { p = *ap; while ( isidchar(*p) ) putc(*p, out), p++; if ( ap < bp - 1 ) fputs(", ", out); } fputs(") ", out); /* Put out the argument declarations */ for ( ap = breaks+2; ap <= bp; ap += 2 ) (*ap)[-1] = ';'; if ( vararg != 0 ) { *vararg = 0; fputs(breaks[0], out); /* any prior args */ fputs("va_dcl", out); /* the final arg */ fputs(bp[0], out); } else fputs(breaks[0], out); } free((char *)breaks); return 0; }
